PRE-ORDER - AVAILABILITY MID TO LATE JANUARY

Maniac Line Water Spot Mineral Remover 500ml
Professional Limescale and Mineral Contamination Remover for Car Detailing

Maniac Line Water Spot Mineral Remover is the ultimate solution for eliminating stubborn mineral contaminants such as limescale, water spots, and salt residues from your vehicle’s surfaces. Specifically formulated for car care, it’s ideal for tackling deposits that traditional car washing methods cannot remove, ensuring a pristine finish on glass, paintwork, plastics, and chrome.

Designed for car detailers and enthusiasts, this powerful yet safe formula chemically dissolves contaminants without abrasion, restoring surfaces and enhancing the bond of protective coatings or sealants.

Why Use Water Spot Mineral Remover?
This product is perfect for car detailers looking to maintain a flawless finish on vehicles. It not only removes unsightly mineral stains but also creates an optimal base for further car care treatments like glass sealants or ceramic coatings.

Restore your vehicle's finish with Maniac Line Water Spot Mineral Remover, an essential tool for professional car detailing and ultimate car protection.

• Professional-Grade Decontamination: Effectively removes limescale stains, mineral deposits, superficial oxidation, and acid rain marks from all surfaces.
• Versatile Application: Safe for use on paint, glass, plastics, and chrome, making it an essential product for comprehensive car detailing.
• Prepares Surfaces for Protection: Enhances the adhesion of waxes, coatings, and sealants by eliminating residues that compromise bonding.
• Non-Abrasive Formula: Chemically dissolves contaminants without damaging surfaces.
• Safe and Powerful: Ideal for both light and heavy mineral deposits.

1. Preparation:

   • Wash and dry the vehicle thoroughly to expose mineral stains clearly.
   • Gather the necessary tools: a microfibre pad, microfibre cloth, and a soft-bristled brush.

2. For Localised Stains:

   • Apply the product directly to the affected area.
   • Allow it to dwell for 30 seconds, then wipe off with a damp microfibre cloth such as the Polishing Cloth.
   • Buff with a clean, dry microfibre cloth.

3. For Tough Stains:

   • Reapply the product and extend the dwell time slightly, up to a maximum of 60 seconds.
   • Wipe off and rinse thoroughly to avoid leaving halos.

4. For Large Areas:

   • Treat one panel at a time, applying the product evenly with a microfibre pad.
   • Work it into the surface and rinse with clean water before moving to the next section.

5. For Intricate Areas:

   • Use a soft-bristled brush to work the product into hard-to-reach areas, such as badges, locks, or wheel nuts.
   • Rinse thoroughly to ensure no residue remains.

• Work in a shaded area to prevent the product from drying prematurely.
• Ensure the vehicle’s surface is cool and clean before application.
• Always treat one panel or small section at a time for best results.

Ready to use. No dilution required.

Why is it important to remove lime scale from the surface?

Lime scale on a surface acts in a similar way to tartar on our teeth. Tartar is formed as a result of mineral deposits that take root strongly on the tooth, so much so that it can’t be removed with a normal toothbrush. It is not immediately visible but over time, as it takes root, it could lead to serious damage. The same goes for our cars, lime scale is a residue that cannot be removed with a simple general wash. It settles, in the points where the water stagnates, such as the seat of the wheel nuts, mouldings or emblems. As it builds up, it dulls the body colour and stains the windows. This means that it needs to be removed using “Waterspot Mineral Remover”, a specific product, capable of dissolving limestone while respecting the materials on which it is anchored. Among other things, the lime scale can’t be removed with mechanical decontamination using the claybar. To dissolve the calcium minerals which make up the lime scale, we need to carry out chemical decontamination with "Waterspot Mineral Remover". But these are not the only contaminants that may be present on our car. If we find iron mineral contamination caused by pollution, this can be removed using Iron Remover. You can find out more watching the dedicated video. The result will be a newly purified surface.

How can I check that I have fully decontaminated the lime scale surface?

To check this, simply use a jet of water. If, when you pass a jet of water over the surface of the car you see the water slide off in a compact film, you can be sure that the surface has been completely purified.

Should Water Spot Remover be used on wet or dry cars? It depends on the type of contamination. Work on a dry surface with spot cleaning when there is limited or localized contamination. Apply to a wet car when there is widespread and large contamination or on the windows.

If the car is completely contaminated by lime scale, what should I do?

In the case of strong contamination, such as stains that form when a water jet hits the car from a sprinkler or after rinsing with particularly hard water, or when you notice the dull and opaque bodywork, I would recommend you proceed with a thorough washing with "Prewash shampoo" and "Black & Wrap shampoo".

• Signal Word: Danger
• Hazard Statements:
  • H314 Causes severe skin burns and eye damage.
  • H412 Harmful to aquatic life with long lasting effects.
• Precautionary Statements:
  • P102 Keep out of reach of children.
  • P273 Avoid release to the environment.
  • P280 Wear protective gloves/eye protection/face protection.
  • P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
  • P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water.
  • P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P501 Dispose of contents/container in accordance with local/regional/national/international regulations.
• Product Contains: 2,2’-(octadec-9-enylimino)bisethanol.
• Regulation (EC) No 648/2004: non-ionic surfactants, polycarboxylates, perfumes (CITRONELLOL, Alpha Hexyl Cinnamaldehyde) <5%.