GLUE, TAR & TREE SAP REMOVER

Koch Chemie Eulex is a special product for quickly removing glue (e.g. sticker residue), rubber, tree resin, paint mist, ink stains, oils, greases, tar, etc. from solvent-resistant surfaces such as paint, glass, ceramics, metal, etc. Evaporates quickly, leaves no traces behind and contains no halogenated hydrocarbons.

Eulex is not suitable for use on (unprocessed) plastics. We recommend Koch Chemie Teerwasche for removing tar splashes from plastic.

AREAS OF USE

Solvent-resistant paints and plastics, glass, metal, etc.

DIRECTIONS

Spray Eulex directly onto a dry, absorbent microfibre cloth
Work the product into the surface to be treated
Carefully wipe up the adhesive residue with a soft microfibre cloth
Rinse thoroughly with the high-pressure washer
Wash surface with shampoo

WARNINGS

Not suitable for polycarbonate, polyacrylic and similar plastics
Check for colour fastness and material compatibility before use
Do not use on hot surfaces
Do not use on matt paint, use Eulex M for that

CHOOSING THE RIGHT SOLVENT

STAIN REMOVAL

For exterior stain removal we recommend the use of Orange Power on plastics & rubber and for more solvent resistant materials we recommend the use of Fleckenwasser or, Eulex which a stronger product but must use with caution as it flashes quickly. For interior use we recommend the use of Orange Power and Tinten- & Kuli Ex. However it’s very important to have a clear understanding of the surfaces being treated and their solvent resistance.

DEWAXER

Fleckenwasser is a strong dewaxing solvent, best used for decontamination to remove all remaining residues of waxes, oils etc before Iron removal. Contains acetone so it’s not recommend to remove fine polishing oils as it can soften the surface, increasing the chances of micro-marring with a microfibre towel. For this purpose we recommend Silicon- & Wachsentferner, diluted.

ADHESIVE REMOVAL

We recommend Orange Power on sensitive surfaces such as plastics & rubber. Also recommended for adhesive removal over larger surface areas because of its slow vaporising. For use on smaller, more solvent resistant areas we recommend Eulex, a strong adhesive remover with quick flash times.

TAR REMOVER

For more solvent resistant surfaces we recommend Teerwasche. For more sensitive areas such as plastics & rubber we recommend Orange Power.

Fleckenwasser is a great multi-purpose solvent for removing waxes, oils & tar during the decontamination process but for any remaining, stubborn tar deposits we recommend the follow up use of Teerwasche.

TREE RESIN

Fleckenwasser for more solvent resistant surfaces and Orange Power for the more sensitive surfaces.